Volume 166
Main Index

Pages 1-374 (15 September 1990)

Preface Page ix Alan Riga, StephenH. Roby, Michael Neag

Applications of differential scanning calorimetry and dielectric thermal analysis to the study of paper deterioration Pages 1-16 M. Odlyha, N. Seeley, C.Saroja Wettasinghe

Moisture content of aramid and polybenzimidazole fibers Pages 17-26 Steven E. Keinath, Roger J. Morgan

A study of the flammability of chlorinated polyethylene under pyrolysis conditions Pages 27-39 Michele J. Whiteley, Wei-Ping Pan

Thermal analysis-mass spectrometry and thermogravimetric adsorption on fire retardants Pages 41-52 A. Kettrup, K.-H. Ohrbach, G. Matuschek, A. Joachim

Conformation of ethylene/propylene copolymers (random or block) as seen by 13C NMR, IR and thermal methods Pages 53-68 B.B. Baker Jr., J.K. Bonesteel, M.Y. Keating

Thermal conductivity of polymer melts Pages 69-76 M.Y. Keating, C.S. Mclaren

Physical aging studies in amorphous poly(ethylene terephthalate) (PET) blends Pages 77-92 L. Woo, Y.Wilson Cheung

Memory experiments in physically aging systems: a test of multiordering parameter models Pages 93-103 A.M. Espinoza, J.J. Aklonis

Strain, birefringence, and volume relaxation and recovery in polymer glasses Pages 105-118 D.G. Legrand, W.V. Olszewski, J.T. Bendler

Determination of an optimum resin transfer molding procedure using FDEMS sensing techniques Pages 119-125 David E. Kranbuehl, David Eichinger, Tom Hamilton

Characterization of a polyimide siloxane by thermal analysis Pages 127-136 L.T. Shi

Dynamic mechanical and thermogravimetric analyses of the effect of ferric oxide on the thermaloxidative degradation of silicone rubber Pages 137-145 W.H. Dickstein, R.L. Siemens, E. Hadziioannou

Dynamic mechanical evaluation of a rubber toughened graphite-epoxy composite with application for laminate analysis Pages 147-156 Gregory Hickey, Jim Campagna

Dynamic mechanical analysis of automotive coatings on a metal substrate Pages 157-167 Manoj K. Gupta

Cure monitoring of an epoxy-amine system by dynamic mechanical thermal analysis (DMTA) Pages 169-184 Klaus Hofmann, Wolfgang G. Glasser

Oxygen inhibition in differential scanning calorimetry of free radical polymerization Pages 185-198 Gibson L. Batch, Christopher W. Macosko

A new accelerated oxidative stability test for glass-forming organic compounds Pages 199-206 John P. Elder

Thermal degradation of epoxidized soybean oil in the presence of chlorine-containing polymers Pages 207-218 B.A Howell, S.R. Betso, J.A. Meltzer, P.B. Smith, M.F. Debney

A TG/DTG kinetic model and its application in an in-situ combustion reservoir simulator Pages 219-230 Said Saim, Shapour Vossoughi

Adiabatic calorimetry for evaluation of thermally induced reactions in liquid propellants Pages 231-239 Nathan Klein, Charles S. Leveritt

Thermolysis of nitroarenes: 2,2',4,4',6,6'-hexanitrostilbene Pages 241-249 L.M. Minier, J.C. Oxley

Combining DSC and TG data for measuring heats of reaction Pages 251-265 Roland Huffman, Wei-Ping Pan

Thermogravimetry of filter-borne diesel particulates Pages 267-275 M. Zinbo, L.M. Skewes, C.E. Hunter, D. Schuetzle

Simultaneous thermal analysis-mass spectrometry on lubricant systems and additives Pages 277-289 K.-H. Ohrbach, G. Matuschek, A. Kettrup, A. Joachim

Characterization of macadamia nuts by differential scanning calorimetry for country of origin Pages 291-300 Susan M. Dyszel

Quantitative TG/IR Pages 301-308 Martin Mittleman

Temperature calibration of a power compensation DSC on cooling Pages 309-317 Joseph D. Menczel, Thomas M. Leslie

New applications of the automatic thermal analysis system Pages 319-329 Jim Penn, Nobuo Mastumori, Ryoichi Kinoshita, Yoshiko Teramoto

A high performance sensor for heat-flux differential scanning calorimetry Pages 331-336 G. van der Plaats, T. Kehl

Applications of thermal analysis methods to iron minerals in coal—a synthesis Pages 337-341 S.St.J. Warne, J.V. Dubrawski

Fossil fuels: an overview of trends, methods and applications of thermal analysis Pages 343-349 S.St.J. Warne

Combustion studies of coal derived solid fuels by thermogravimetric analysis: III. Correlation between burnout temperature and carbon combustion efficiency Pages 351-356 M. Rostam-Abadi, J.A. Debarr, W.T. Chen

A TG method of analysis for use in monitoring the efficiency of fluidized-bed coal combustion processes Pages 357-367 S.A. Mikhail, A.M. Turcotte

Author index Page 369

Subject index Pages 371-373